(English)
(English)
Allows for pre-defined and pre-determined travel limits to be set. Single Pole Double-Throw Maintain Switch.Single Omron Limit Switch (#D4A-3E05N-GM).
Limit Switches are sold separately. Single Omron Limit Switch (#D4A-3E05N-GM).
Stabilizes (2) two bridges to function as one unit. Keeps dual bridges from spreading apart.Can be configured from the same assembly.
Attaches to the RAD4110, RAD6110 or RAD7510 Series Rail. Spring Configuration allows operator to bypass the limit switch. Allows for pre-defined and pre-determined travel limits to be set.
Attaches to the RAD4110, RAD6110 or RAD7510 Series Rail. Single Pole Double-Throw Maintain Switch.Allows for pre-defined and pre-determined travel limits to be set.
Attaches to Knight Load Trolleys and End Trucks.Pneumatic Brake System.Parking brake is also a drag brake when regulator is attached.
Attaches to Knight Load Trolleys and End Trucks.The Rubber Bumper absorbs the impact between two bridges on same runway.
Typically used to extend a bridge or runway past the existing bridge. Telescoping Rail Includes: RAD4110 Rail, (2) Two Load Trolleys, and a Steel Backer.Provides an extended reach beyond the working limits of a bridge.
Travels along the RAD7510 Series Rail.Typically used to extend a bridge or runway past the existing bridge.Telescoping Rail Includes: RAD7510 Rail, (2) two load trolleys, and a steel backer
Single Pole Double-Throw Maintain Switch.Fork Lever Actuator.Oil Tight Body.
Allows for pre-defined and pre-determined travel limits to be set. Single Pole Double-Throw Maintain Switch. Dual Omron Limit Switch (#D4A-3E05N-GM).
Limit Switches are sold separately. Dual Omron Limit Switch (#D4A-3E05N-GM).
Suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Rail. For Direct or Offset Loads. Fixed Height Hanger.
Suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Rail. For Direct or Offset Loads. Fixed Height Hanger.
Suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Rail. For Direct Loads Only. Max. Structural Support Flange Size: 2.5 in. [64mm].
Suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Rail. For Direct Loads Only. Adjustable Height Hanger.
For Offset and Direct Loads Only. Adjustable Height Hanger. Structural Support Flange Size: 2 in. – 7 in. [51mm – 178mm].
Suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Rail. For Direct Loads Only. Adjustable Height Hanger.
Suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Rail. For Direct Loads Only. Adjustable Height Hanger.
Suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Rail. For Direct Loads Only. Adjustable Height Hanger.
For Direct or Offset Loads. Redundant Structural Support Flange Sizes: 2 in. – 7 in. [51mm – 178mm]. Coated with an environmentally friendly corrosion protection. ** (Autophoretic ACC 900®).
For Direct or Offset Loads. Redundant Structural Support Flange Size: 7 in. – 11 in. [178mm – 279mm]. Coated with an environmentally friendly corrosion protection. ** (Autophoretic ACC 900®).
For Direct or Offset Loads. Structural Support Flange Size: 2 in. – 7 in. [51mm – 178mm]. Coated with an environmentally friendly corrosion protection. ** (Autophoretic ACC 900®).
For Direct or Offset Loads. Structural Support Flange Size: 7 in. – 11 in. [178mm – 279mm]. Coated with an environmentally friendly corrosion protection. ** (Autophoretic ACC 900®).
Suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Rail. For Direct Loads Only. Adjustable Height Hanger.
For Offset and Direct Loads Only. Adjustable Height Hanger. Structural Support Flange Size: 7 in. – 11 in. [178mm – 279mm].
For use with W-Beams Only. For Direct Loads Only. Rigid Hanger.
For Direct Loads Only. Rigid Hanger. Structural Support Flange Size: 4 in. – 8 in. [101mm – 203mm].
Structural Support Flange Size: 2 in. – 7 in. [51mm – 178mm]. Used when Hangers Threaded Rod Length is 2 ft. [0.6m] or Greater. Includes: (6) Jam Nuts.
Structural Support Flange Size: 7 in. – 11 in. [178mm – 279mm]. Used when Hangers Threaded Rod Length is 2 ft. [0.6m] or Greater. Includes: (6) Jam Nuts.
For Direct Loads. Coated with an environmentally friendly corrosion protection. ** (Autophoretic ACC 900®). Adjustable Height Hanger Bracket
Mounts to RAD4110, RAD6110 and RAD7510 Series Rail. Suspends Knight TR2000 Series Rail. Coated with an environmentally friendly corrosion protection. ** (Autophoretic ACC 900®).
For Direct Loads. Maximum C-Channel Flange: Up to 2.5 in. [64mm] . Includes 1 ft. [0.6m] Threaded Rod. (Each additional 1 ft. [0.6m] of rod adds .530 lbs. [0.24kg] to overall weight.)
For Direct Loads. Fixed Height Hanger. Coated with an environmentally friendly corrosion protection. ** (Autophoretic ACC 900®).
For Direct Loads. Structural Support Flange Size: 2 in.- 7 in. [51mm – 178mm]. Coated with an environmentally friendly corrosion protection. ** (Autophoretic ACC 900®).
For Direct Loads. Vertical Adjustability: Up to 1.5 in. [38mm]. (Adj. in .25 in. [6.35mm) increments) Structural Support Flange Size: 2 in.- 7 in. [51mm – 178mm].
For Direct Loads. Structural Support Flange Size: 7 in.- 11 in. [178mm – 279mm]. Coated with an environmentally friendly corrosion protection. ** (Autophoretic ACC 900®).
For Direct Loads. Structural Support Flange Size: 2 in. – 7 in. [51mm – 178mm] Includes 6 in. [152mm] Threaded Rod. (Each additional 6 in. [152mm] of rod adds .530 lbs. [0.24kg] to overall weight.)
For Direct Loads. Structural Support Flange Size: 7 in.- 11 in. [178mm – 279mm]. Includes 6 in. [152mm] Threaded Rod. (Each additional 6 in. [152mm] of rod adds .530 lbs. [0.24kg] to overall weight.)
For Direct Loads. Structural Support Flange Size: 2 in.- 7 in. [51mm – 178mm]. Fixed Height Hanger.
For Direct Loads. Vertical Adjustability: Up to 1.5 in. [38mm]. (Adj. in .25 in. [6.35mm) increments)Structural Support Flange Size: 7 in.- 11 in. [178mm – 279mm].
Carries festooned hose used in hose management kits. Fiberglass filled High Impact Nylon Wheels. Side Guide Rollers with integrated bearings. Double-Shielded bearings keep dirt out, and do not require lubrication. Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.
Travels on tag line on the side of the RAD4100, RAD4110, RAD6110, RAD7500, and RAD7510 Series Rails. Zero stack-up lengths. Carries festooned hose or cable used in hose management kits. Fiberglass filled High Impact Nylon Wheels.Double-Shielded bearings keep dirt out, and do not require lubrication. Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.
Fiberglass filled High Impact Nylon Wheels. Side Guide Rollers with integrated bearings. Double-Shielded bearings keep dirt out, and do not require lubrication. Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.
Fiberglass filled High Impact Nylon Wheels.Side Guide Rollers with integrated bearings.Double-Shielded bearings keep dirt out, and do not require lubrication.Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.
Fiberglass filled High Impact Nylon Wheels. Side Guide Rollers with integrated bearings. Double-shielded wheel bearings. Does not require lubrication. Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.
Eye Hook Inside Diameter: 1.16 in. [29mm]. Eye Hook Outer Diameter: 1.61 in. [40.9mm]. Side Guide Rollers with integrated bearings. Fiberglass filled High Impact Nylon Wheels. Double-Shielded bearings keep dirt out, and do not require lubrication. Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.
Travels inside RAD6110 Series Rail. Fiberglass filled High Impact Nylon Wheels. Side Guide Rollers with integrated bearings. Double-Shielded bearings keep dirt out, and do not require lubrication. Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.
Eye Hook Inside Diameter: 1.25 in.[31.8mm]. Eye Hook Outer Diameter: 1.97 in. [50mm]. Double-Shielded bearings keep dirt out, and do not require lubrication. Fiberglass filled High Impact Nylon Wheels. Side Guide Rollers with integrated bearings. Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.
Velcro Straps. Supports Cable and Festooning. Fiberglass filled High Impact Nylon Wheels. Side Guide Rollers with integrated bearings. Double-Shielded bearings keep dirt out, and do not require lubrication. Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F. Max Capacity
Suspends Knight’s RAD4110, RAD6110 RAD7510 Bridges. Travels inside RAD4110 and RAD7510 Series Rail Runway.
Suspends Knight RAD4110, RAD6110 and RAD7510 Single Bridges. Travels Inside RAD4110 Series Rail Runway. Fiberglass filled High Impact Nylon Wheels. Side Guide Rollers with integrated bearings. Max. Recommended Bridge Length: Up to 15 ft. [4.5m]. Yoke design allows pivoting in the “X” and “Y” directions for freedom of movement. Double-Shielded bearings keep dirt out, and do not require lubrication. Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.
Suspends Knight RAD4110, RAD6110 and RAD7510 Single Bridges. Travels Inside RAD4110 Series Rail Runway. Fiberglass filled High Impact Nylon Wheels. Side Guide Rollers with integrated bearings. Max. Recommended Bridge Length: Up to 15 ft. [4.5m]. Double-Shielded bearings keep dirt out, does not require lubrication and prevents drag on the End Truck. Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.
Suspends Knight’s RAD4110 or RAD7510 Dual Bridge. Travels Inside RAD4110 Series Rail Runway. Incremental Adjustments: 0.38 in. – 0.75 in. [10mm – 19mm]. Fiberglass filled High Impact Nylon Wheels. • Side Guide Rollers with integrated bearings. Double-Shielded bearings keep dirt out, does not require lubrication and prevents drag on the end truck. End truck may be adjusted slightly lower or higher on one end of the runway to allow the load trolley to automatically roll back to its home position. Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.
Suspends Knight’s RAD4110, RAD6110, or RAD7510 Dual Bridge. Travels inside RAD6110 Series Rail Runway. Fiberglass filled High Impact Nylon Wheels. Side Guide Rollers with integrated bearings. Max. Recommended Bridge Length: Up to 15 ft. [4.5m]. Double-Shielded bearings keep dirt out, and do not require lubrication. Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F. Max Capacity
Primarily used as a dust cover. Prevents an end truck or load trolley from exiting the rail. When used with a “MRAA4455 Mid-Rail Stop”; it forms The “MRAS4454 Redundant End Cap Stop”.
Separates the working area of a bridge or runway and/ or prevents a bridge from over travel. Dampens the impact force of the load trolley striking the mid-rail stop. Shock Diameter: 1.00 in. [25.4mm]. Shock Length: 8.06 in. [205mm]. Shock Absorbs up to 106 ft. lbs. [144Nm).
Separates the working area of a bridge or runway and/ or prevents a bridge from over travel. Can be used in conjunction with The “MRAA4011 End Cap”; to form The “MRAS4454 Redundant End Cap Stop”.
Splices (2) sections of the RAD4110 Series and RAD6110 Series Rail. Bolt-On Splice Kit. Bolt-on kit eliminates need to weld bosses. Provides easier access to bolt heads.
Velcro Straps. Supports Cable and Festooning. Fiberglass filled High Impact Nylon Wheels. Side Guide Rollers with integrated bearings. Double-Shielded bearings keep dirt out, and do not require lubrication. Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.